The production equipment for stainless steel reaction kettle grout is generally a kettle type tubular reactor with stirring equipment, which is a typical machine equipment commonly used in manufacturing industries such as chemical plants, pharmaceuticals, dyes, and building coatings. The cylinder clamp is also the meaning of the partition, and the key is to introduce heating substances inside the cylinder clamp to humidify or heat the kettle. Their mechanical design involves not only the content of the chemical plant vessel design scheme in the basic textbook of mechanical manufacturing equipment, but also different design schemes and calculation regulations.

With the recognition of electric heater reaction kettle grout production equipment by every manufacturing industry, its application scope continues to develop and has become a popular reaction kettle product. In order to provide everyone with a comprehensive understanding of this idealized reaction vessel and enable them to better repair the product. Below, we will provide detailed solutions for many common faults.

If there is a leakage in the sealing, please tighten the extruder screw immediately to avoid further leakage and safety risks. In addition, the cover image needs to be further sharpened, polished, and polished.

Secondly, if there is a leakage problem with the gate valve, it will take time to replace the valve and seat. Any component that becomes brittle immediately endangers the normal operation of the reactor.

Thirdly, if it is found that the inner magnetic tile cannot rotate normally and the outer magnetic tile is functioning normally, please replace the inner magnetic tile. Fourthly, if there is noise during the operation of the reactor, it should be due to the need to replace the rolling bearings.